FREE SHIPPING ON ALL 4 AND 20 PACKS

VIRALOC™  ASTM LEVEL 2
VIRALOC™  ASTM LEVEL 2
VIRALOC™  ASTM LEVEL 2
VIRALOC™  ASTM LEVEL 2
VIRALOC™  ASTM LEVEL 2
VIRALOC™  ASTM LEVEL 2
  • Load image into Gallery viewer, VIRALOC™  ASTM LEVEL 2
  • Load image into Gallery viewer, VIRALOC™  ASTM LEVEL 2
  • Load image into Gallery viewer, VIRALOC™  ASTM LEVEL 2
  • Load image into Gallery viewer, VIRALOC™  ASTM LEVEL 2
  • Load image into Gallery viewer, VIRALOC™  ASTM LEVEL 2
  • Load image into Gallery viewer, VIRALOC™  ASTM LEVEL 2

VIRALOC™ ASTM LEVEL 2

Regular price
$15.99 CAD
Sale price
$15.99 CAD
Regular price
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.

Performance

Level 2

 

Bacterial filtration efficiency (BFE%)

≥98%

ASTM F2101

Particle filtration efficiency (PFE%)

≥98%

ASTM F2299

Differential pressure (Δp mm H20/cm2)

<6.0

EN 14683 Annex C

Splash resistance (mmHg)

120

ASTM F1862

Flame spread

Class 1

16 CFR Part 1610

 

Application

Worn by personnel to cover the mouth, nose, and chin, the mask provides a physical barrier to block exhalation or ejection of pollutants from mouth and nose, and to reduce breathing in airborne particles. This device is not designed, sold or intended for use except as indicated. This mask is not a respirator.

 


Material specifications

Inner layer Polypropylene spunbound nonwoven fabric
Middle layer Polypropylene melt-blown nonwoven
Outer layer Polypropylene spunbound nonwoven fabric
Ear loops Polyester/nylon spandex band
Nose clip Metal wire with plastic covering

VIRALOC procedural masks contain NO GRAPHENE

Warnings and limitations

  1. Product not intended to provide protection against pathogenic biological airborne particulates.
  2. Not recommended for use in aerosol-generating procedures and any clinical conditions where there is a significant risk of infection through inhalation exposure.
  3. Failure to properly use and maintain this product could result in illness or even death.
  4. Only for one-time use, please destroy and dispose of according to regulations after use.
  5. Please use it within the validity period.
  6. Do not use if the package is damaged.
  7. Please refer to the instructions before use.

Donning instructions

  1. Hold the mask by the ear loops with the colored side facing outwards and the nose bridge upwards, and place both ear loops around both ears.
  2. Bend the nose clip to match the shape of the nose to prevent unfiltered air from entering.
  3. Pull the mask to your chin to produce a tight seal.
  1. Use this product immediately after the package is opened. Avoid hand contact within the interior part of the mask. Do not wash.
  2. Intended for use in environments with moderate fluid exposure.
  3. Product is not intended to replace the need for FDA-cleared surgical masks or FDA-cleared or authorized respirators.

 

Documents: ASTM F2100 TEST REPORT

                    BROCHURE