|
Performance |
Level 1 |
|
|
Bacterial filtration efficiency (BFE%) |
≥95% |
ASTM F2101 |
|
Particle filtration efficiency (PFE%) |
≥95% |
ASTM F2299 |
|
Differential pressure (Δp mm H20/cm2) |
<5.0 |
EN 14683 Annex C |
|
Splash resistance (mmHg) |
80 |
ASTM F1862 |
|
Flame spread |
Class 1 |
16 CFR Part 1610 |
Application
Worn by personnel to cover the mouth, nose, and chin, the mask provides a physical barrier to block exhalation or ejection of pollutants from mouth and nose, and to reduce breathing in airborne particles. This device is not designed, sold or intended for use except as indicated. This mask is not a respirator.
Material specifications
| Inner layer | Polypropylene spunbound nonwoven fabric |
| Middle layer | Polypropylene melt-blown nonwoven |
| Outer layer | Polypropylene spunbound nonwoven fabric |
| Ear loops | Polyester/nylon spandex band |
| Nose clip | Metal wire with plastic covering |
VIRALOC procedural masks contain NO GRAPHENE
Warnings and limitations
- Product not intended to provide protection against pathogenic biological airborne particulates.
- Not recommended for use in aerosol-generating procedures and any clinical conditions where there is a significant risk of infection through inhalation exposure.
- Failure to properly use and maintain this product could result in illness or even death.
- Only for one-time use, please destroy and dispose of according to regulations after use.
- Please use it within the validity period.
- Do not use if the package is damaged.
- Please refer to the instructions before use.
Donning instructions
- Hold the mask by the ear loops with the colored side facing outwards and the nose bridge upwards, and place both ear loops around both ears.
- Bend the nose clip to match the shape of the nose to prevent unfiltered air from entering.
- Pull the mask to your chin to produce a tight seal.
- Use this product immediately after the package is opened. Avoid hand contact within the interior part of the mask. Do not wash.
- Intended for use in environments with moderate fluid exposure.
- Product is not intended to replace the need for FDA-cleared surgical masks or FDA-cleared or authorized respirators.
Documents: ASTM F2100 TEST REPORT
